There is already … There is already one up of that. I think that it is assembly but I mention the only disassembly concern that you would have which is of the flywheel.
The clutch bell … The clutch bell should free spin. When the flywheel gains RPMs then the clutch shoes will push out and hold the bell.
The flywheel should not move against the shaft but should move with the piston. If the piston is not moving then remove the glow plug as it adds compression and check. If the piston is not seized against the sleeve then it will move with the flywheel.
I think that this … I think that this one was a remake for someone where I talk in a different vid.
You can mix your own fuel but nitro fuel off the shelf, 99% of the time, has the oil in it. There are two types, synth and castor. More castor = more protection as it takes 700 degrees to burn it vs synth which is cheaper and burns easier. Get a good fuel with a mixture of both. =)
do you have any … do you have any vids of how to take the sleeve and piston out? i need to rebuild my motor but im not suree how to take the sleeve and piston out
Im doing a savage … Im doing a savage project now for a 3 speed conversion. No vids on that but the thread (when it is posted) will have complete pictures of step by step. A 2 speed would be the same minus the extra gears and spacing.
Nice. Thanks for … Nice. Thanks for sharing once again. You make it looks simple Any Videos on how to change a savage tranny? My buddy needs help and im just learning teardowns myself. PEace
This vid is on engine dissasembly for a nitro rc engine
Comments on Engine tear down »
There is already …
There is already one up of that. I think that it is assembly but I mention the only disassembly concern that you would have which is of the flywheel.
how do u get the …
how do u get the flywheel off and the cluch and that stuff. can u mak a vid of it.
Its part of a video …
Its part of a video series and the intro says just that- reassembly
ur puting back …
ur puting back together not tearing it down
The clutch bell …
The clutch bell should free spin. When the flywheel gains RPMs then the clutch shoes will push out and hold the bell.
The flywheel should not move against the shaft but should move with the piston. If the piston is not moving then remove the glow plug as it adds compression and check. If the piston is not seized against the sleeve then it will move with the flywheel.
what happens when …
what happens when ur fly weel dosent move but ur clutch bell dose
It is a Nova Racing …
It is a Nova Racing cooling head and I do not think that it will fit.
what type of …
what type of cooling head do you have for that motor? and will it fit an sts .28
Plus, castor smells …
Plus, castor smells great!
I think that this …
I think that this one was a remake for someone where I talk in a different vid.
You can mix your own fuel but nitro fuel off the shelf, 99% of the time, has the oil in it. There are two types, synth and castor. More castor = more protection as it takes 700 degrees to burn it vs synth which is cheaper and burns easier. Get a good fuel with a mixture of both. =)
Wht dont u talk on …
Wht dont u talk on this one?
So nitros are two strokes right? u mix oil in the fuel? i have a 2 strk motorcycle thats y i ask…
I can do that for …
I can do that for you
do you have any …
do you have any vids of how to take the sleeve and piston out? i need to rebuild my motor but im not suree how to take the sleeve and piston out
Thank you for …
Thank you for watching! =)
cool!!! thanks for …
cool!!! thanks for the vid.
Im doing a savage …
Im doing a savage project now for a 3 speed conversion. No vids on that but the thread (when it is posted) will have complete pictures of step by step. A 2 speed would be the same minus the extra gears and spacing.
send your bud to the forum and we can help him =)
Nice. Thanks for …
Any Videos on how to change a savage tranny? My buddy needs help and im just learning teardowns myself. PEace
Nice. Thanks for sharing once again. You make it looks simple