How to Tune Nitro Engine of TRex Truck

I first use 1 litre …
I first use 1 litre Tornado 5% 'Run in' fuel. After that 16% Fuel. (Tornado is a brand, people told me it's the best. I have know idea if thats true).
I spoke to some people from a model racing club (real 80) and they told me you can use higher then 16% fuel. U will get higher speeds with it but it is much easyer to damage your engine… I choice for safety, but what do I know??

if it has VX-18 .18 …
if it has VX-18 .18 Engine, shells and appearances don't matter. Power and performance does Cheers

For Nitro trucks …
For Nitro trucks and buggies, 15% works best. I however always order 30% in bulk for my planes, so have got no choice. i use 30%, get best results too.

hey what percent …
hey what percent fuel is it??
just bought one not sure what it is

Thank man. …
Thank man. Explanation helped a lot! I just bought the same car on Ebay. It's called 'Seben Nitrozilla'. Just has another shell on it

wow congrats.
wow congrats.

I'll see if I can …
I'll see if I can find this here in China. thanks for your suggestion

Good suggestion. …
Good suggestion. Thanks mate, saving my time. By the way nice videos you got out there

i won the world …
i won the world championships with it… and its great im telling you!

i9t also really …
i9t also really protects ur engine…

i recommend …
i recommend sidewinder fuel for ur car cuz it has after run oil in it and its like the best fuel! good performance and it can be anything from backyard bashing fuel to racing fuel to drag racing fuel…

just put the …
just put the threadlock onto the screws and itl not fall out…

would you please …
would you please send me a picture of that part and screws to my email address? alishanmao at gmail dot com I would be able to solve your problem better then

i found out the …
i found out the problem, there was a screw missing from the front joint where the dog bone meets the gear box, i bought 2 screws (2nd just in case) at ACE'S hardware store. they scre in appropriatetly, but won't stay in when i accelerate freewheel, like how this problem was started in the first place. is there a way to make them stay but not perminatey?

put the car on the …
put the car on the ground, move it by hands and see if front the dog bone connected to front gear rotates. if it doesn't move, you need to check your main differential gear box and may replace it with new one. if dog bone rotates moves, your front gear might have got problems. See if you can solve it. replacing gear boxes is always easy

after i was driving …
after i was driving my nitro buggy in the driveway and the garage the 4wheel drie ability is lost and it is now driven by the rear tires. i can see that the axle that meet the front whees work, but they don't work. i was braking constantly and before i go in depth of what the problem may be, do you know a solution?

it's normal, don't …
it's normal, don't worry about it happens a lot with new engines and trucks that I had

ok i got it ruuning …
ok i got it ruuning good so far,i'll have to change the onboard controll for the throttle, but when i brung it in i noticed that there was some thick liquid that came out the exhaust that was a bit browner than theblue fuel, and that same liquid came up the tube that connects the tank to the exhaust then i stopped the motor. does this relate to the valve needle?

Your idle speed …
Your idle speed settings are messed up. Try adjusting throttle servo arm and the mechanism attached to it. I have just bought a new Engine 21CX for my Tyrannosaurus truck. When I install it, it will be on video and I will also show how to deal with speeding up engine so stay tuned. Till then adjust throttle servo arm and idle speed screw. Don't mess up with low end valve. that is to worry later.

i have a 1/10 scale …
i have a 1/10 scale rc buggy with an engie just like that. but i have a problem breaking it in. when i start it, it's uncalm and speeds up and the wheels move as if pressure was applied to the throttle and the engine stops when i remove the sparkplug ignitor9charged for 1-2hrs.i only let it run no more than a few seconds, i only messed with the needle valve and it is also on a block. i want to know in detail what am suppose to do to the valve motor ect. (reply if responding)

Already did and …
Already did and waiting for your videos mate

Do all the …
Do all the tyranno's have pipes, because my 1/10 nitro RTR Colt monster truck has a muffler, they're funny things if u have ever seen them lol, alishanmao, keep in tune for my colt rc vid thats coming, and add me 2 ur friends list man.

aww ur awesome mate …
aww ur awesome mate!!!helpn lots these few weeks!!!

Thanks mate. …
Thanks mate. Purpose of video is being served

good vid
it …
good vid
it helping ather very good with the sam engine:)