3D Flying Practice with Great Planes Fun Force 3D - Video #3

Please comment, Rate or subscribe to support more videos…

Today Fri. 11-16-07 .

I'm havin' Fun again!!! Going wild at another local school, It's all clear, nobody arround, & its a nice Day with very light wind! So I'm going to get Crazy Practicing 3D & Hovering.

Today I am flying my 4-CH 3D Trainer (my Beatup Plane Right Now), the Great Planes Fun Force Zero EP, it comes as an ARF Kit, I bought mine from towerhobbies.com
Link http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPHM9&P=SM . It comes as a very inexpensive kit (under $30). This kit assenbles extremely quick & is so simple to do repairs on. You will need to buy all of you electronics but the kit does come with a geared brushed motor.

I added a Brushless Motor & 3 Cell 1350Mah Lipo Cell for performance instead of the Stock brushed Motor.
I bought the Battery & Motor from epyaya.com. I Bought my Brushless Kms kbsc18 speed control fom the hobby people website. I am running a Great Planes Electrifly GP 10 x 4.5 S Prop (or also known as 254 x 114 S).

Great Setup at 10 to 15 Min of flight on a pack.

*I also added a length of 1/16 inch carbon fibre rod to each side of the foam body & covered this over with clear tape, This has increased the airframe structure durability BIG TIME!

The Music on this Video was produced by me using the Hammerhead Rhythm Station, Thanks Hammerhead!!!!

Stay tuned! more videos to come, & maybe some flight school videos also…

Thanks for Viewing!
Have Fun & Fly Safe!!!!

Product Notes:
Tower Hobbies
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPHM9&P=SM

Great Planes Fun Force Zero EP Sport/Fighter ARF 34.5"

FEATURES: Construction: Carbon fiber reinforced EPS foam
Wings: One-piece carbon fiber tube reinforced EPS
Motor: Speed Force 370 Brushed, BB with leads
Gearbox: 5to1 ratio, pre-attached to motor
Prop: 10×4.5 w/ prop saver Building Time:
Ready to fly in about 2 to 3 hours

INCLUDES: Great Planes ElectriFly Fun Force Zero Sport/Fighter with six streamers, & hardware, instructions, 370 Brushed motor, 5:1 gearbox, 10×4.5 propeller, prop saver

THIS KIT WILL REQUIRES: Radio: 4-channel Radio with mini or micro receiver
Servos: 3 micro or nano - FUTM0046 (1-elevator, 1-aileron, 1-rudder)
Servo Extensions: One each 6" and 12" - HCAM2000 and HCAM2100
Electronic Speed Control: 20A minimum - GPMM2025 (for stock Brushed Motor!)
Battery: 1250-1500mAh 11.1V 3S Lithium Polymer - GPMP0823 ________________________

SPECS: Wingspan: 34.5" (876mm) Wing Area: 354 sq in (22.87 sq dm) Weight: 15oz (425g) Wing Loading: 6 oz/sq ft (18.31 g/sq dm) Length: 36" (914mm) Airfoil: Fully-symmetrical, mid-wing placement Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of the wing Control Throws: High Rate/3D Rate Low Rate/Sport Rate Elevator: 3-1/2" (89mm) 1-1/2" (38mm) up and down Rudder: 3-1/2" (89mm) 2" (51mm) right and left Ailerons: 3" (76mm) 1-5/8" (41mm) up and down

Duration : 0:6:21