June 21, 2008
Super Cub Night Life - HZ Super Cub with LiGlow lights
I recently got a LiGlow lighting system for my plane. It came pretty much plug-and-play and all I had to do was figure out how to run the wires cleanly and seat the LEDs onto the plane. It turned out to be fantastic and turned many heads at the park.
Here are the specifications:
Hobbyzone Super Cub
- 3S LiPo 2100 power system with stock 480 motor
- AR6200 Rx with DX7 2.4ghz Tx
- LiGlow Power System
You can buy the lighting system from the ever trusty T.T. Check out his site below:
http://www.tjtrc.com/LiPoV2.html
If you like what you see, check out my other videos!
No crash. : )
Duration : 0:3:29
Filed under Remote Controlled Airplanes by admin

Comments on Super Cub Night Life - HZ Super Cub with LiGlow lights »
Not necessarily, …
Not necessarily, but you do need a lipo set that is tailored for a certain voltage. You can find out more on the website link I posted in the description.
do ihave to have a …
do ihave to have a lipo for the lights to work?
it is made of z-foam
it is made of z-foam
is the super cub …
is the super cub made of plastic? i really would like to purchase one! awsome night flying! love it!
thats fucking …
thats fucking awesome!!!! yes!
This is the best …
This is the best first-plane ever for a beginner. Easy to fly and super durable (this is important!).
If your Tx has an …
If your Tx has an extra channel, then you can use it yea.
is the super cub a …
is the super cub a plane for beginners to use like easy handling and easy to master. also is it easy controls for it??
is the super cub a …
is the super cub a plane for beginners to use like easy handling and easy to master. also is it easy controls for it??
Hey kool lights you …
Hey kool lights you go on your rc plane! can you control the lights to go on and off using your rc controller? also do you have to buy a special controller to make that work? I got a Esky Lama V4 dunno if i can use its controller to control lights do you know? PLEASE REPLY BACK TO ME ASAP PLEASE THANK YOU!!!!!!!!!!
Assuming a 3 cell …
Assuming a 3 cell lipo you have to remove/change a
jumper on the TX to disable the auto cut off
of the motor.
This means that you have to time your flights
or you will risk damaging your battery.
Hey I got the Cub …
Hey I got the Cub too..I want this power setup! Will a lipo pack plug straight into the plane?
Did you end up …
Did you end up getting them, J?
60W Charger (FMA …
60W Charger (FMA Cellpro 4S) charges it in about 25 minutes. Flight time is 40 minutes on this setup.
how long is the …
how long is the flight/charge time?
reply pls
Khat–
Killer …
Khat–
Killer video…! Man those lights look sharp…There my favorite…Lol..Had them bookmarked forever, now I want them even more…!
I didn't modify the …
I didn't modify the prop … that is just a replacement prop from Parkzone for the SC, the P-51, and some other planes. Apparently they all share the same prop!
i like the prop …
i like the prop modifaction. i did the same thing with mine. i love the super cub. HZ SUPER CUB 4EVER!!!!!!!!!!!
Thank you. There …
Thank you. There is a link in the video description above. I know the new YouTube interface is not as easy to use as before but if you read the info, it's there. : )
cool video, where …
cool video, where can i get those lights from?
Thanks P Diddy. : )
Thanks P Diddy. : )
I really liked the …
I really liked the control and music in this one! Flying and landing in the dark may be easier with lights (and possible) but it's still not a cake walk. Crisp landings and the fly music deserves double recognition!
Thanks, Sinai. …
Thanks, Sinai. Landing on the walkways is tough because they are very narrow, slightly sloped upwards, and the wind is about 15 degrees to them. With grass, you can point any direction you want so it's easy mode haha! Thanks for watching.
Dude great vid . . …
Dude great vid . . . Love the editing. (Sinai)
Your last two landings were the best (and you did those in the DARK!!! Guess it's no problem with LANDING LIGHTS! AWESOME.
Thanks, W. We are …
Thanks, W. We are experimenting with tripod shots for some situations and the Beagle is no longer adding vibrations to the camera. : ) I need to get an image-stabilizer system for my next camera…